Bessey BES8511 Cabinetry Clamp, Red

#ad
#ad
Bessey BES8511 #ad - Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp is in place. 1 1/2" to 2" stile width capacity & up to 1 1/2" thickness. The guide flips out of the way so you can drive screws to connect the cabinet frames without removing or repositioning the clamp. Hardened drill bushing insures perfect drilling of frames for joining frames together.

It works on stiles 1-1/2 to 2 inches and up to 1-1/2 thick each. There is an integrated, hardened pilot-hole drilling guide on one side. Securely hold stiles flush for drilling & securing with fasteners. Jaw face protective pads included. Align cabinet face frames easily. Professional quality installation is achieved in a fraction of the time compared to the use of more conventional clamps.

Bessey BES8511 Cabinetry Clamp, Red #ad - The clamp holds the individual cabinet edges together while also keeping the faces along the joint flush. The bessey cabinetry clamp is designed to combine the multiple steps of face frame cabinet installation into one easy process.

More information about Bessey BES8511 #ad

Fastcap 3-HUPPERHAND Upper 3rd Hand Support Poles System 2-pack Kit

#ad
#ad
FastCap CECOMINOD072805 #ad - Fastcap 3-HUPPERHAND Upper 3rd Hand Support Poles System 2-pack Kit #ad - This kit also includes the ballistic nylon carrying bag and 4 - universal feet. Designed by cabinetmakers, for cabinetmakers. The 3rd hand family is strong and this 2 pack of Upper Hands is no exception with each pole having a 150-lbs max capacity. Quick release lever. Use the 3rd hand upper hand system by FastCap to as a load jack to secure small loads in the back of your truck bed.

Textured rubber pads for gripping.

More information about FastCap CECOMINOD072805 #ad


Similar products



GRK 772691120793 CAB8212HP Cabinet HandyPak 8 by 2-1/2-Inch, 100 Screws per Package

#ad
#ad
GRK 772691120793 #ad - Ideal for Cabinets. Designed by cabinetmakers, for cabinetmakers. Self-tapping W-cut thread design. Use grk bit T-15. Grk cab8212hp cabinet handypak 8 by 2-1/2-inch Screws, 100 Screws per Package Textured rubber pads for gripping. Zip-Tip. Patented Climatek coating. Quick release lever.

More information about GRK 772691120793 #ad


Similar products



Kreg Tool Company KHI-PULL Cabinet Hardware Jig

#ad
#ad
Kreg KHI-PULL #ad - Versatile for mounting single and multi-hole knobs. Quick release lever. Ideal for Cabinets. Adjustable guides for accurate hole placement. Self-tapping W-cut thread design. Use grk bit T-15. Designed by cabinetmakers, for cabinetmakers. Kreg tool company khi-pull Cabinet Hardware Jig Textured rubber pads for gripping.

Kreg Tool Company KHI-PULL Cabinet Hardware Jig #ad - Built-in measuring scales for repeatable results . Patented Climatek coating. Adjustable edge guide for easy positioning . Zip-Tip. Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy.

More information about Kreg KHI-PULL #ad


Similar products



DEWALT DW2535 3 Piece #6, #8, and #10 Countersink Assortment

#ad
#ad
Dewalt DW2535 #ad - Use grk bit T-15. Easy and simple use kit. Self-tapping W-cut thread design. Drill, countersink and counterbore in one step. Adjustable edge guide for easy positioning . Zip-Tip. Designed by cabinetmakers, for cabinetmakers. Adjustable guides for accurate hole placement. Replacement tapered bits offered. Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy.

. Textured rubber pads for gripping. The product is manufactured in China. Ideal for Cabinets. Quick release lever. Built-in measuring scales for repeatable results . Four-cutter countersink and tapered drill bit provide superior speed and ideal finish. 3 piece, durable rubber finger grips for comfortable use, rapid load system, countersink set, provides quick & 1/2" cordless & pressure activated Ball Groove System For Rapid Loading & Strong Retention, Accessories Have Hex Shank Locking System To Prevent Slipping, Holder Fits All Brands Of 3/8" & Easy Accessory Changes Without Rechucking, Impact & Rust Resistant Nickel Plated Nose, Stainless Steel Interior Parts & Corded Drills.

DEWALT DW2535 3 Piece #6, #8, and #10 Countersink Assortment #ad - Versatile for mounting single and multi-hole knobs. The product is 3PC Countersink Set. Patented Climatek coating.

More information about Dewalt DW2535 #ad


Similar products



GRK 772691177308 FTHS8212HP Trim Handy FIN 8 by 2-1/2-Inch Head, 100 Screws per Package

#ad
#ad
GRK 772691177308 #ad - Ideal for Cabinets. Grk fths8212hp trim handy fin 8 by 2-1/2-inch head screws, 100 Screws per Package Textured rubber pads for gripping. Self-tapping W-cut thread design. Designed by cabinetmakers, for cabinetmakers. Use grk bit T-10 Built-in measuring scales for repeatable results . Quick release lever. Drill, countersink and counterbore in one step.

GRK 772691177308 FTHS8212HP Trim Handy FIN 8 by 2-1/2-Inch Head, 100 Screws per Package #ad - Versatile for mounting single and multi-hole knobs. The product is 3PC Countersink Set. Adjustable edge guide for easy positioning . Four-cutter countersink and tapered drill bit provide superior speed and ideal finish. Self-tapping W-cut thread design. Zip-Tip. Adjustable guides for accurate hole placement. Easy and simple use kit.

Finish Trim Head Screw. Use grk bit T-15. Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy. The product is manufactured in China.

More information about GRK 772691177308 #ad


Similar products



GRK CAB8318HP Cabinet HandyPak 8 by 3-1/8-Inch Screws, 50 Screws per Package

#ad
#ad
GRK 772691120830 #ad - Zip-Tip. Use grk bit T-10 Built-in measuring scales for repeatable results . Four-cutter countersink and tapered drill bit provide superior speed and ideal finish. Ideal for Cabinets. Replacement tapered bits offered. Versatile for mounting single and multi-hole knobs. Zip-Tip. Self-tapping W-cut thread design. Self-tapping W-cut thread design.

GRK CAB8318HP Cabinet HandyPak 8 by 3-1/8-Inch Screws, 50 Screws per Package #ad - Adjustable guides for accurate hole placement. Finish Trim Head Screw. Zip-Tip. Patented Climatek coating. Adjustable edge guide for easy positioning . Patented Climatek coating. Patented Climatek coating. Use grk bit T-15. Quick release lever. The product is 3PC Countersink Set. Highlights : specifically designed for uses in cabinet construction and installation thin enough to prevent most material splitting, while still providing sufficient strength for secure installation Washer head design presses flush against any cabinet surface Can be used for vinyl siding installation as well - coated with Climatek corrosion protection for this purpose Self-tapping, with a W-Cut thread design, and Zip-Tip 50 Screws per Package Size: #8 X 3-1/8" Textured rubber pads for gripping.

Easy and simple use kit. Self-tapping W-cut thread design.

More information about GRK 772691120830 #ad


Similar products



DEWALT DW7084 Crown Stops for DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718

#ad
#ad
Dewalt DW7084 #ad - Adjustable edge guide for easy positioning . Use grk bit T-15. The product is manufactured in China. Textured rubber pads for gripping. Self-tapping W-cut thread design. Designed by cabinetmakers, for cabinetmakers. Zip-Tip. Accurately positions crown molding vertically against the saw fence. Includes 2 stops, one for each side of the blade.

Built-in measuring scales for repeatable results . Self-tapping W-cut thread design. Finish Trim Head Screw. The product is 3PC Countersink Set. Quick release lever. Use grk bit T-10 Measures 6-1/2-x-4-1/2 inches. Use grk bit T-15. Ideal for Cabinets. Replacement tapered bits offered. Zip-Tip. Adjustable guides for accurate hole placement.

DEWALT DW7084 Crown Stops for DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718 #ad - Drill, countersink and counterbore in one step. Used to accurately position crown molding vertically against saw fence at exactly the same angle for every cut.

More information about Dewalt DW7084 #ad


Similar products



Drawer Front Installation Clamps

#ad
#ad
Rockler #ad - Use grk bit T-10 Replacement tapered bits offered. Built-in measuring scales for repeatable results . Use grk bit T-15. Designed to work with dewalt models dw703, dw708, dw706, DW716, DW712, dw715, DW717 and DW718. Ideal for Cabinets. Quick release lever. Drill, countersink and counterbore in one step. The product is manufactured in China.

Drawer Front Installation Clamps #ad - Patented Climatek coating. Self-tapping W-cut thread design. Textured rubber pads for gripping. Self-tapping W-cut thread design. Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy. Easy and simple use kit. Zip-Tip. Includes 2 stops, one for each side of the blade. Adjustable guides for accurate hole placement.

Measures 6-1/2-x-4-1/2 inches. Ideal for Cabinets. Four-cutter countersink and tapered drill bit provide superior speed and ideal finish. Self-tapping W-cut thread design.

More information about Rockler #ad


Similar products



TOURACE Cabinet Hardware Jig for Handles and Knobs Aluminum Alloy Drill Guide Sleeve Drawer Pull Wood Drilling Dowelling Tools Set Drawer Knob Pull Drilling Templates Jig Tool

#ad
#ad
TOURACE #ad - Jig is made of virtually indestructible aluminum and ABS plastic. Adjustable guides for accurate hole placement. Includes 2 stops, one for each side of the blade. Use grk bit T-15. Zip-Tip. Designed by cabinetmakers, for cabinetmakers. Tough, steel construction. Self-tapping W-cut thread design. High precision, wide range of adjustment.

TOURACE Cabinet Hardware Jig for Handles and Knobs Aluminum Alloy Drill Guide Sleeve Drawer Pull Wood Drilling Dowelling Tools Set Drawer Knob Pull Drilling Templates Jig Tool #ad - The product is manufactured in China. Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy. Patented Climatek coating. Use grk bit T-15. Quick release lever. Easy to operate. Ideal for Cabinets. Adjustable edge guide for easy positioning . Self-tapping W-cut thread design. Measures 6-1/2-x-4-1/2 inches.

The fastest and most accurate hardware tool on the market - Install hardware 10x faster. Replacement tapered bits offered. Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.

More information about TOURACE #ad


Similar products



Collins Tool Miter Spring Clamps - 12 Pack

#ad
#ad
Collins Tool Company #ad - Jig is made of virtually indestructible aluminum and ABS plastic. Adjustable edge guide for easy positioning . Self-tapping W-cut thread design. Ideal for Cabinets. Tough, steel construction. The clamps can be applied and removed by hand, but the Spring Pliers make the job much easier. They will really save your hands, plus the Pliers place clamps exactly where you want them, and help keep you from scratching stock when you remove them.

Collins Tool Miter Spring Clamps - 12 Pack #ad - Spring Clamp Pliers sold separately. High precision, wide range of adjustment. Accurately positions crown molding vertically against the saw fence. The product is manufactured in China. Textured rubber pads for gripping. Patented Climatek coating. The product is 3PC Countersink Set. Use grk bit T-15. Patented Climatek coating.

Finish Trim Head Screw. Keeps any mitered corner from opening up while glue dries for the perfect finish. No need to carry a bunch of different sizes.

More information about Collins Tool Company #ad


Similar products