As an Amazon Associate I earn from qualifying purchases.
1. Adafruit #ad
Adafruit Micro Lipo w/MicroUSB Jack, USB LiIon/LiPoly charger, v1 ADA1904 #adAdafruit #ad
- For use with adafruit lipoly/liion batteries only. Dimensions: 21mm x 19mm x 2mm / 08" x 075" x 008". Lipo/lipoly/LiIon Batteries not included. Comes assembled and tested with a jst cable, 100ma charge current, 5v input via micro-B USB connector, For charging single Lithium Ion/Lithium Polymer 3.
7/4. 2v batteries not for older 3. 6/4. 1v cells, adjustable to 500mA by soldering a jumper closed. Battery not included. Other batteries may have different voltage, chemistry, polarity or pinout.
2. Adafruit #ad
Adafruit Mini Lipo w/Mini-B USB Jack, USB LiIon/LiPoly Charger, v1 #adAdafruit #ad
- Free bonus JST cable. Two leds - one red Charging and one green Fully charged. For charging single adafruit lithium Ion/Lithium Polymer 3. 7/4. 2v batteries not for older 3. 6/4. 1v cells. Small and easy to use - you can keep it on your desk or mount it easily into any project. Mini-usB port.
3. Adafruit #ad
USB Li-Ion/LiPoly Charger, Adafruit 259 , v1.2 #adAdafruit #ad
- Comes assembled and tested with a free bonus jst cable. 01 inch. For charging single lithium ion/lithium polymer. Chip supports a 10k ntc thermistor which we have stuffed as a plain 10K.
For people who require temperature monitors using high charge rates, remove the 10K and solder in the thermistor in its place. Weight: 5. 7g 02oz.
4. HiLetgo #ad
HiLetgo 3pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions #adHiLetgo #ad
- Input interface: Type-c USB. Battery overcharge lifting voltage: 4. 00 v. Battery: over-current protection current 3 A. Light state: no load the light not bright, red light for recharging, is full of green light. Maximum charging current output: 1000 ma.
5. Adafruit #ad
PowerBoost 1000 Basic, 5V USB Boost @ 1000mA from 1.8V+ #adAdafruit #ad
- Dimensions: 29mm x 23mm x 2mm / 1. 1" x. 9" x. 1". Height: w/ jst: 7. 5mm /. 30". Dc/dc boost converter. Run from 1. 8v batteries or higher, and convert that voltage to 5. 2v dc for running your 5V projects.
6. CHENBO #ad
CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module #adCHENBO #ad
- Inputs with micro usb female, can be directly input to do with the phone charger rechargeable lithium battery. Input voltage: 5V. Connect the battery to the b + b-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
Maximum charge current: 1000mA. Charging cut-off voltage: 4. 2v ± 1%.
7. Atnsinc #ad
15pcs 5V 1A TP4056 Charging Module Type-C USB 18650 Lithium Battery Charger Board with Protection Type-C USB #adAtnsinc #ad
- Power indicator: Red is charging, Green is fully charged. There is not included Installation instruction. If you are the first time to do this job, we suggest you can watch related video on Youtube before installation.
Input voltage: 5v; max output current: 1a; charging cut-off voltage: 4. 2v ± 1%; input interface: Type-C USB. Note:please check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity.
Application:it can charge for single-cell lith ium battery or multi-section parallelled lith ium batteries, and still retains voltage input wiring pads, can be directly input to do with rechargeable lith ium battery as a phone charger, can be powered by USB ports; The module with usb port, which is convenient for DIY. Package includes:15*tp4056 Type-C USB Charging Module.
8. diymore #ad
Diymore 5pcs TP4056 Type-C USB 5V 1A Battery Charger Module Charging Board with Dual Protection Functions #addiymore #ad
- Light state: no load the light not bright, red light for recharging, is full of blue light. Battery: over-current protection current 3 A. Maximum charging current output: 1000 ma. Battery overcharge lifting voltage: 4. 00 v. Input interface: Type-C USB.
9. Adafruit #ad
Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On #adAdafruit #ad
- Charging is performed in three stages. Ideally for use with the 3. 3v pro trinkets & ItsyBitsy. Will work with any size battery and USB port.
10. EEMB #ad
EEMB 3.7V Lipo Battery 3700mAh 103395 Lithium Polymer ion Battery Rechargeable Lithium ion Polymer Battery with JST Connector 1 Make Sure Device Polarity Matches with Battery Before Purchase!!! #adEEMB #ad
- Certifications—un 38. 3 compliant and ul certified for cell. Must confirm before purchase: 1. Battery size; 2. Connector model; 3. Connector size; 4. Connector polarity - this is not universal!!! it will cause a shortage if the polarity of the battery connector does not match your device.
Pcm protection function: over charge, over current, short circuit protection. Reliable performance—no leaking, over discharge, excellent cost performance and long cycle life.
We will respond to you within 24 hours. And store the battery in cool and dry place. More than 400 eemb batteries are UL certified. We recommend to charge the battery every 3 months after receipt of the battery and maintain the voltage 3.
7-4. 0v. Application—suitable for bluetooth speaker, blood oxygen tracking equipment, keyboard and mouse, dash cam, e-books, Wi-Fi enabled smart home systems, telematics, PDA and digital cameras, sleep management equipment, monitoring units, tracking devices, GPS, notebook computers, pulse monitors. Voltage: 3. 7v; typical capacity: 3700mah, min capacity: 3500mAh; Weight: approximate 74g; Size: 33. 5 x 96 x 10
|Manufacturer||EEMB Co.,Ltd #ad|