Top 10 Arduino Nano V3.0 – Computer Internal Components

As an Amazon Associate I earn from qualifying purchases.

1. LAFVIN

#ad

Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE Nano x 3 with USB Cable

#ad
LAFVIN #ad - Works the same as original Nano, runs perfectly on programming software. Improved new version CH340G Replace FT232RL. Using atmel atmega328p-au mcu, support ISP download; Support USB download and Power. Lafvin nano ch340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila. Original atmega328p ch340 chip is used. Lafvin nano v3. 0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
BrandLAFVIN #ad
ManufacturerLAFVIN #ad
Weight0.01 Pounds
Part NumberLA-020
Model8541582500

2. REXQualis

#ad

Compatible with Arduino Nano V3.0 Nano x 3 with 3 Cable, REXQualis Nano V3.0, 3pcs Nano Board CH340 / ATmega328P with USB Cable

#ad
REXQualis #ad - It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. The power source is automatically selected to the highest voltage source.

Rexqualis nano is a smallest, complete, and breadboard friendly board. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. Rexqualis nano is using atmel atmega328p-au mcu, support ISP download and USB download, Power via the Mini-B USB. Rexqualis nano v3. 0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
BrandREXQualis #ad
ManufacturerREXQualis #ad
Part NumberRQ-NANO-01

3. DORHEA

#ad

Compatible with Arduino Electronics Development Board Nano 328P Nano 3.0, DORHEA for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Microcontroller Board

#ad
DORHEA #ad - It's got a pin layout that works well with the mini or the Basic Stamp TX, RX, ATN, GND )on one top, power and ground on the other. Additionally, each of which provide 10 bits of resolution. By default they measure from ground to 5 volts, some pins have specialized functionality.

It is a smallest, complete and breadboard friendly board. Analog pins 6 and 7 cannot be used as digital pins. The power source is automatically selected to the highest voltage source. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. More breadboard space:nano's got the breadboard-ability of the boarduino and the mini usB with smaller footprint than either, so users have more breadboard space.

The nano has 8 analog inputs, though is it possible to change the upper end of their range using the analogReference function. It has everything that arduino/genuino UNO has electrically with more analog input pins and on board +5V AREF jumper. This board is using the chips atmega328P and CH340, not FT232 as official Arduino.
BrandDORHEA #ad
ManufacturerDorhea #ad

4. Emakefun

#ad

Emakefun Compatible with Arduino Nano V3.0 Project ATmega328P 5V 16M Micro-Controller Board with USB Cable 3pcs

#ad
Emakefun #ad - Support isp download, complete, USB download and USB Power. Nano's got the breadboard-ability of the boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space.

The upgraded emakefun nano is a small, breadboard-friendly and high quality board based on the Atmega328P-AU MCU. Adopting Immersion Gold Technology. The upgraded emakefun nano improved the design of PCB to solve the issue that the pins of Nano can't fit to breadboard perfectly. When you use our upgraded Nano, you will find the Pins are aligned nicely with the holes of breadborad. No soldering needed. We use high quality pcb original material and iproved produce technology to make sure every board has smooth edge and more reliable quality.
BrandEmakefun #ad
ManufacturerEmakefun #ad
Part NumberNanoboard-3pcs

5. Aideepen

#ad

Aideepen 5pcs Nano Screw Terminal Adapter Shield Expansion Board Nano V3.0 AVR ATMEGA328P-AU Module for Arduino

#ad
Aideepen #ad - Easy to useyou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard. Any questions, you can contact me by email at any time.

Size is about 2. 21" x 1. 65" x 050" l* w* h. Little tipsit lables for arduino nano version 3. 0, however you can still use this adapter for the older version just have to remember that A0-A7 are in the reverse order. Designed for arduino nano v3. 0the item is a terminal expansion adapter, working very well for prototyping Arduino Nano projects. Finished productthese boards are fully assembled. No soldering required. Nice platform for wiring circuitsit provided a nice platform for wiring circuits to Arduino Nano. It can connect a large number of digital lines to Arduino while maintaining the footprint of the original Nano.
BrandAideepen #ad
ManufacturerAideepen #ad
Part Number70100945
Warranty1

6. Makerfire

#ad

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino

#ad
Makerfire #ad - Microcontroller ATmega328P. Input voltage recommended 7V-12V. Flash memory 32 kb atmega328 of which 2 KB used by bootloader. Digital i/o pins 14 of which 6 provide PWM output. Operating Voltage logic level 5 V.
BrandMakerfire #ad
ManufacturerElisona #ad
Height0.04 Inches
Length1.34 Inches
Weight0.04 Pounds
Width0.67 Inches
Part NumberG418920056
ModelG418920056

7. Emakefun

#ad

Emakefun Nano Terminal Expansion Adapter Board Compatible with Arduino Nano V3.0 AVR ATMEGA328P with NRF2401+ Expansion Interface, DC Power Supply Interface 2PCS

#ad
Emakefun #ad - There are pins expansion hole for the nano board, which can directly lead the pins; With DC power supply interface, you can directly add external power or battery to supply power. We used immersion gold technology to make sure every board has more reliable quality. Size is about 2. 6" x 2. 0" x 03" l* w* h. Added a filter capacitor to enhance the stability of wireless communication. The item is a terminal expansion adapter, working very well for prototyping Arduino Nano projects. With nrf2401+ expansion interface, you can insert NRF2401+ to achieve wireless communication.
BrandEmakefun #ad
ManufacturerEmakefun #ad
Part NumberExpansion board

8. WYPH

#ad

WYPH Nano Terminal Adapter Shield Expansion Board for Arduino Nano V3.0 AVR ATMEGA328P-AU Module Terminal Adapter 3pcs

#ad
WYPH #ad - It lables for arduino nano version 1. 0, however you can still use this adapter for the new version V3. 0 It can work very well for Arduino Nano projects.

It provided a nice platform for wiring circuits for Arduino Nano. You can use this adapter to easily hook up for Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard. This item is a terminal expansion adapter, designed for Arduino Nano V3. 0 It can connect a large number of digital lines for Arduino while maintaining the footprint of the original Nano. No soldering required. The board is fully assembled.
BrandWYPH #ad
ManufacturerShenzhen Weiyapuhua Technology Co.,Ltd #ad
Part Number60-026-3
Model60-026-3

9. AiTrip

#ad

Compatible with Arduino Nano V3.0 Nano x 3 With1 Cable, AITRIP for Arduino Nano V3.0, Nano Board CH340/ATmega328P With USB Cable

#ad
AiTrip #ad - It is a smallest, complete, and breadboard friendly board. Comes with 3 packs of nano v3. 0 micro controller module, each nano v3. 0 micro controller module is equipped with 3pcs pin headers 2pcs 15pin headers +1pcs 6pin headers, no welding needed.

Uses the ch340g instead of the ftdi ft232rl ic which can improve the transfer speed, increase the stability in windows and solve the issues with FTDI drivers bricking non-original chips, ATMEGA328P offers even more programming and data memory space. The nano is using the chips atmega328P and CH340, Replace FT232RL. Also it has 1 cable. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. You can download ch340 Driver from download link in the product description below.
BrandAiTrip #ad
ManufacturerAiTrip #ad
Height1.77 Inches
Length0.7 Inches
Width0.23 Inches
Part Number15231

10. WYPH

#ad

WYPH Nano I/O Expansion Sensor Shield Module for Arduino UNO R3 Nano V3.0 / Nano Pro Compatible with UNO R1 Duemilanove 2009 Expansion Board 3pcs

#ad
WYPH #ad - Nano io expansion shield is specifically designed to facilitate an easy connection between Nano and many other devices. It is a perfect companion of Nano breadboard and compatible with Arduino Nano V2. 0 and V3. 0 In essence, it expands the Nano controller to link those devices in a simple and trouble free manner.
BrandWYPH #ad
ManufacturerShenzhen Weiyapuhua Technology Co.,Ltd #ad
Part NumberGB80-215-3
ModelGB80-215-3