Top 10 CPU Fan Hub – Computer Case Fans

As an Amazon Associate I earn from qualifying purchases.

1. ThreeBulls


PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 1 to 5 Way 15.7 Inch, ThreeBulls PWM Fan Hub

ThreeBulls #ad - Excellent 4-pin pwm 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.

Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans. Widely compatible: the cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy. Package contents: 1 black 15. 7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug.
BrandThreeBulls #ad
ManufacturerThreeBulls #ad
Part Number8541606340



Occupying only One 4-pin Motherboard Header, Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM, DEEPCOOL FH-10 Integrated Fan Hub

DEEP COOL #ad - Only speed of Fan 1 can be identified by the system. They will run at FULL SPEED. Capable of connecting to 10 PC fans simultaneously for cooling the computer system. That is, all pwm fans will run at the same DUTY RATIO. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time. Velcro and screw mountings applicable for the tower interiors. Powered by a stable sata connection to the system PSU for up to 10 fans. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function.
BrandDEEP COOL #ad
ManufacturerDEEPCOOL #ad
Height1.18 Inches
Length8.39 Inches
Width4.41 Inches
Part NumberFH-10

3. Thermaltake


Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1

Thermaltake #ad - Supports 10 4-pin independent fans :capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis. Direct sata power input: powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use. Included ties/velcro for easy placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place. Blue led power Indicator.
BrandThermaltake #ad
ManufacturerThermaltake USA Direct #ad
Height0.7 Inches
Length3.2 Inches
Weight0.1 Pounds
Width1.7 Inches
Part NumberAC-023-AN1NAN-A1
Warranty1 year warranty



DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04

DEEP COOL #ad - 4-port fan hub. Support Cable management. Support PWM function. Double-sided adhesive Installation. Compatible with 3-pin/4-pin fans.
BrandDEEP COOL #ad
ManufacturerDeepcool #ad
Height3.4 Inches
Length2.5 Inches
Weight0.1 Pounds
Width1 Inches
Part NumberFH-04
Warranty1 Year



Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

ELECTOP #ad - If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%. Since the mainboard can only receive one rotation speed signal, but no speed signal. For both 4-pin and 3-pin fans. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function.

Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. Please note 4pin fan speed can be adjusted by temperature control. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.

Red is expected to be a pass through for the cpu fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. So, then the speed is regulated by the speed for the "source" fan. The ten fans will spin at the same speed, the hub has a power source fed from the computer power supply, that designated by the system for that fan. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces.
BrandELECTOP #ad
ManufacturerElectop #ad
Part NumberCPUCOOL-1-10-4P

6. skineat


Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points

skineat #ad - The pwm interface is connected to cpu fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan. You then need to connect the fan hub’s PWM cable to the motherboard. The other 9 black fan ports can NOT be adjusted in speed and will copy the power level of what the red port is at.

Connect 1 fan to the red port on fan hub then connect remaining fans. Pwm fan controller temperature control the cpu port red port, would be the only port that can be controlled by the operating system. Step by step set-up you will receive 1 hub & 1 pwm connector in your package. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. Please note 4 pin fan speed can be adjusted by temperature control as well. Most efficient sata to fan adapter in 2019 managing multiple fans from a single case input has become easier for you now.

You just plug the board into the cpu fan motherboard connection & CONFIGURATION Simple installation & then SATA for power. It has eva double-sided adhesive tape at the back of the hub to mount to the case or any flat place. If your motherboard lacks fan interfaces, use this neat & expand fan interfaces designed for 12 V 4-pin fan. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
Brandskineat #ad
Manufacturerskineat #ad
Height0.39 Inches
Length0.39 Inches
Width0.39 Inches
Part Number088

7. Endlesss


Endlesss PWM Fan Hub Splitter 4 Pin Black Sleeved 1 to 5 Way PC CPU Cooling Case Fan Splitter Hub Adapter Cable for Computer Cooler Case Fans 4-Pin & 3-Pin 14 Inches 1 Pack

Endlesss #ad - Plug-n-play and easy to plug, 5 way 4-Pin male connector jack fan hub cable. The extension cable offers greater flexibility between motherboard and CPU cooling fans.

Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean & tidy. Only the "cpu" port can be read the speed. Excellent 1 to 5 splitter 5 way 4-pin PWM fan power supply extension cable cord, better power supply for PC computer case internal motherboard fans. Widely compatible: support 4-pin and 3-pin fans cable, the 1 to 5 splitter 5 way fan power extension cable compatible with 4-Pin and 3-Pin PC case motherboard fans.
BrandEndlesss #ad
ManufacturerEndlesss #ad
Height0.5 Inches
Length14 Inches
Width2 Inches
Part NumberPFH-001



ARCTIC Case Fan Hub, 10-fold PWM Fan Distributor with SATA Power, Black

ARCTIC #ad - Synchronous fan control: your set pwm signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system.

Expand your ventilation: even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. External power supply: the fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. Cable management: case fan hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing.

Technical details: output: 10 x 4-pin pwm socket, input: sata power + 4-pin fan header, input current: up to 4. 5 a, output current: up to 1 A per Port, Dimensions: 55. 6 x 86. 3 x 14. 3 mm, weight: 50 g.
BrandARCTIC #ad
ManufacturerARCTIC #ad
Height3.4 Inches
Length0.56 Inches
Weight0.11 Pounds
Width2.19 Inches
Part NumberACFAN00175A
Warranty2 years



Chassis Fan Hub CPU Cooling 10 Port 12 V Molex to PWM Connector with 4 Pin 3 Pin Efficient PC-Fan Controller System with Adhesive Tape Dedicated Supply from PSU to Link Multiple Points

BUYMINERS.CA #ad - Easy to install - just plug the molex fan controller into the motherboard and connect to the PSU. The pwm fan hub then matches the power level for the other ports. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis.

If you are unhappy for any reason, contact us for a full refund. Manages multiple fans - if your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand. The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. Take care during installation to avoid bending the pins and capacitor.

The 12v fan controller accurately controls 4-pin fan speed from a single case input. No frills, all function - strong wire connections and clean sleeving are part of our simple, cost effective design. Money back guarantee - all of our products are backed by a manufacturer's warranty, and we will go the extra mile to make things right. Cooling when you need it - quiet when you don't.
ManufacturerBUYMINERS.CA #ad
Height0.5 Inches
Length3 Inches
Width2.75 Inches
Warranty365 Days

10. TeamProfitcom


PWM Fan Hub PC 5 Way Splitter Sleeved PWM Fan Splitter Hub Adapter Cable for 12V Desktop Computer Cooler Case Fans 4-Pin & 3-Pin 14 inches 2 Pack TeamProfitcom

TeamProfitcom #ad - Compatible with all 12v cPU and case fans with 4 pin or 3 pin connector;. Power up to 5 pc fans from a Single 4-Pin PWM Fan Header. Connector: 1 female 4-pin connector & 4 Male 4-pin Connectors1 for 12V CPU and 4 for case fans;.
BrandTeamProfitcom #ad
ManufacturerTeamProfitcom #ad
Part NumberBX0019-1415X