Top 10 DC Motor with Encoder – Toys & Games

As an Amazon Associate I earn from qualifying purchases.

1. CQRobot

#ad

CQRobot 270:1 Metal Gearmotor 37Dx72.5L mm 12V with 64 CPR Encoder. with Mounting Bracket, 40 RPM/80 kg.cm 1112 oz.in, D-Shaped Gearbox Output Shaft is 16 mm Long and 6 mm in Diameter.

#ad
CQRobot #ad - No-load performance @ 12v: 40 rpm; no-load Speed @ 6V: 20 RPM. Stall torque @ 12v: 80 kg. Cm 1112 oz. In; stall torque @ 6V: 46 kg. Cm 639 oz. In. For projects such as robot, rC car model, DIY engine toy custom and 3D Printers. 270:1 metal gearmotor 37dx72. 5l mm 12v with 64 cpr Encoder, with Mounting Bracket. Wiki: http://www. Cqrobot. Wiki/index. Php/metal_dc_geared_motor_w/Encoder_CQGB37Y001.
BrandCQRobot #ad
ManufacturerCQRobot #ad
Height1.89 Inches
Length4.09 Inches
Width1.89 Inches
Part NumberAngelANQI0003US
ModelAngelANQI0003US

2. CQRobot

#ad

D-Shaped Gearbox Output Shaft is 16 mm Long and 6 mm in Diameter., 157 RPM/28 kg.cm 389 oz.in, CQRobot 70:1 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder. with Mounting Bracket

#ad
CQRobot #ad - No-load performance @ 12v: 157 rpm; no-load Speed @ 6V: 78 RPM. Stall torque @ 12v: 28 kg. Cm 389 oz. In; stall torque @ 6V: 14 kg. Cm 194 oz. In. For projects such as robot, rC car model, DIY engine toy custom and 3D Printers. Wiki: http://www. Cqrobot. Wiki/index. Php/metal_dc_geared_motor_w/Encoder_CQGB37Y001. 70:1 metal gearmotor 37dx70l mm 12v with 64 CPR Encoder, with Mounting Bracket.
BrandCQRobot #ad
ManufacturerCQRobot #ad
Part NumberCQR12V37D64CPR30GR
ModelCQR12V37D64CPR70GR

3. KeeYees

#ad

KeeYees L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with DC Motor and Smart Car Wheel Compatible with Arduino

#ad
KeeYees #ad - Smart car wheels: the wheels are made of high-strength plastic and the tires are made of durable black rubber. Tt motor: the motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.

It has the strong driving ability, low calorific value and strong anti-interference ability. It not only comes with 4pcs wheels and motors, but also 2pcs motor drive modules and 60pcs jumper wires, which are very useful accessories for your project. To avoid damage the voltage stabilizing chip of Motor Drive Module, please use an external 5V logic supply when using more than 12V driving voltage. Motor drive controller: l298n used as the main driver chip. This is a good parts kit for an arduino and raspberry pi based RC car project.
BrandKeeYees #ad
ManufacturerKeeYees #ad

4. EMOZNY

#ad

Speed Encoder and Battery Box for DIY, EMO Smart Robot Car Chassis Kit with Motors

#ad
EMOZNY #ad - 2 dc gear motors, Motor reduction ratio of 48:1. Can be used with raspberry pi or arduino. Holes for all kinds of modules. Ideal for diy, multi-function and Various kinds of positioning holes. Convenient installation, firm and reliable. It can be used with other devices to realize function of tracing, speed testing, obstacle avoidance, distance testing, wireless remote control.
BrandEMOZNY #ad
ManufacturerEMOZNY #ad
Part Number4332957106
ModelNA

5. CQRobot

#ad

CQRobot 30:1 Metal Gearmotor 37Dx68L mm 12V with 64 CPR Encoder. with Mounting Bracket, D-Shaped Gearbox Output Shaft is 16 mm Long and 6 mm in Diameter., 366 RPM/13 kg.cm 180 oz.in

#ad
CQRobot #ad - 30:1 metal gearmotor 37dx68l mm 12v with 64 CPR Encoder, with Mounting Bracket. Wiki: http://www. Cqrobot. Wiki/index. Php/metal_dc_geared_motor_w/Encoder_CQGB37Y001. For projects such as robot, rC car model, DIY engine toy custom and 3D Printers. No-load performance @ 12v: 366 rpm; no-load Speed @ 6V: 183 RPM. Stall torque @ 12v: 13 kg. Cm 180 oz. In; stall torque @ 6V: 6. 8 kg. Cm 94 oz. In.
BrandCQRobot #ad
ManufacturerCQRobot #ad
Part NumberCQR12V37D64CPR30GR
ModelCQR12V37D64CPR30GR

6. CQRobot

#ad

CQRobot Metal DC Geared Motor w/Encoder with Metal Mounting Bracket -12V/585RPM /8.6Kg.cm.

#ad
CQRobot #ad - No-load speed: 6v - 292 rpm / 12v - 585 rpm Plus/Minus 10%. Locked-rotor torque: 6v - 4. 3kg. Cm / 12v - 8. 6kg. Cm. Rated torque : 6v - 1. 075kg. Cm / 12v - 2. 15kg. Cm. Wiki: http://www. Cqrobot. Wiki/index. Php/metal_dc_geared_motor_w/Encoder_CQGB37Y001. This is a gear motor w/encoder, for projects Such as Robot, custom servo, Support 6V and 12V working voltage, Arduino and 3D Printers.
BrandCQRobot #ad
ManufacturerCQRobot #ad
Part NumberAngelDJ0005US
ModelAngelDJ0005US

7. KEYESTUDIO

#ad

KEYESTUDIO DC Motor Wheel Parts Kit for Arduino Robot Smart Car, 4 x TT Motor 3-6V Uniaxial DC Gear Motors, 4X Small Rubber Wheels for Robotic Vehicle DIY Beginners

#ad
KEYESTUDIO #ad - Operating voltage: 3v~12v dc recommended operating voltage of about 6 to 8V; Maximum torque: 800gf cm min when it is 3V. This mini electric motor is a general purpose motor, work with batteries or solar cells perfectly. No-load speed: 1:48; rpm:200when it is 4. 5v; load current: 170mA when it is 4. 5v. Car wheel size: 69mmouter diameter, 26mmthickness, 46mminter diameter. The motor is well packed and gives a very good friction to the wheels and can easily create an amazing 4X4 smart car.
BrandKEYESTUDIO #ad
Manufacturerkeyes #ad
Part NumberKS0324

8. DFROBOT

#ad

DFROBOT DC Motor Driver HAT for Raspberry Pi via I2C | Support 2-Way DC Motor and DC Motor with Encoder |

#ad
DFROBOT #ad - It communicates with Raspberry Pi via I2C, easy to configure and drive motors. This is a raspberry pi dc motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder.

Product wiki >>> https://wiki. Dfrobot. Com/dc_motor_driver_hat_SKU_DFR0592. The single channel continuous current is 1. 2a and the peak current is up to 2A. Besides that, a high-performance TB6612FNG motor drive chip is integrated on the module. Any technical issues after purchase please contact with our tech-support team: [email protected] Com. The motor driver supports 7~12V wide input voltage. It can be used together with raspberry Pi to make smart DIY car, DIY tank, mechanical fish, balance car, etc. The dc motor driver hat adopts stm32 micro processor to analyze the command sent by the upper host, and then convert into motor drive signal after calculation.
BrandDFROBOT #ad
ManufacturerDFROBOT #ad
Part NumberDFR0592
ModelDFR0592

9. CQRobot

#ad

12V/251RPM/18Kg.cm, CQRobot Metal DC Geared Motor w/Encoder with Metal Mounting Bracket

#ad
CQRobot #ad - Wiki: http://www. Cqrobot. Wiki/index. Php/metal_dc_geared_motor_w/Encoder_CQGB37Y001. This is a gear motor w/encoder, support 6v and 12V working voltage, Custom Servo, for Projects Such as Robot, Arduino and 3D Printers. Rated torque : 6v - 2. 225kg. Cm / 12v - 4. 5kg. Cm. Locked-rotor torque: 6v - 8. 9kg. Cm / 12v - 18Kg. Cm. No-load speed: 6v - 125rpm / 12v - 251rpm Plus/Minus 10%.
BrandCQRobot #ad
ManufacturerCQRobot #ad
Part NumberAngelFIT0186US
ModelAngelFIT0186US

10. CQRobot

#ad

CQRobot Metal DC Geared Motor w/Encoder with Metal Mounting Bracket -12V/1100RPM /5.1Kg.cm.

#ad
CQRobot #ad - No-load speed: 6v - 550 rpm / 12v - 1100 rpm Plus/Minus 10%. Locked-rotor torque: 6v - 2. 5kg. Cm / 12v - 5. 1kg. Cm. This is a gear motor w/encoder, for projects such as Robot, Support 6V and 12V working voltage, Custom Servo, Arduino and 3D Printers. Wiki: http://www. Cqrobot. Wiki/index. Php/metal_dc_geared_motor_w/Encoder_CQGB37Y001. Rated torque : 6v - 0625kg. Cm / 12v - 1. 275kg. Cm.
BrandCQRobot #ad
ManufacturerCQRobot #ad
Part NumberAngelDJUSGL-2
ModelAngelDJUSGL-2