Top 10 Epaper Display 3 Color – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. waveshare

 #ad

Waveshare 7.5inch E-Paper E-Ink Display HAT B for Raspberry Pi 800×480 Pixels Red/Black/White Three-Color with SPI Interface

#ad
waveshare #ad - Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards, Jetson Nano. Spi interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3. 3v / 5v mcus. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/STM32.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Height3.54 Inches
Length7.09 Inches
Weight0.22 Pounds
Width3.94 Inches
Part Number7.5inch e-Paper HAT (B)
Model7.5inch e-Paper HAT (B)

2. waveshare

 #ad

Tri-Color 1.54 Inch E-Ink Display Module Three-Color Resolution 200x200 3.3v E-Paper Electronic Screen Panel with Embedded Controller SPI Interface Support for Raspberry Pi/STM32/Nucleo/Jetson Nano

#ad
waveshare #ad - Spi interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc. Ultra low power consumption, basically power is only required for refreshing;Onboard voltage translator, compatible with 3. 3v/5v mcus. No backlight, keeps displaying last content for a long time even when power down. E-ink display module, with embedded controller, 1. 54inch, 200x200 resolution, black, communicating via SPI interface, supports red, and white three-color display.
Brandwaveshare #ad
Manufacturerwaveshare #ad
Height0.08 Inches
Length0.79 Inches
Weight0.02 Pounds
Width0.79 Inches
Part Number1.54inch e-Paper Module (B)

3. waveshare

 #ad

7.5inch E-Ink Display HAT,800x480 Pixel Black,White Two-Color SPI Interface E-Paper Screen LCD for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano no/Ard/Nucleo

#ad
waveshare #ad - Operating voltage: 3. 3v~5v interface: spi outline dimension: 1702mm × 111. 2mm display size: 163. 2mm × 97. 92mm dot pitch: 0205 × 0204 resolution: 800×480 Display color: black, white.

Standby power: 170°. Spi interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc. Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards, and Jetson Nano. Grey scale: 2 full refresh time: 5s refresh power: 38mWtyp. Ultra low power consumption, basically power is only required for refreshing. No backlight, keeps displaying last content for a long time even when power down.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part Number7.5inch E-Ink Display HAT
Model7.5inch E-Ink Display HAT-1

4. waveshare

 #ad

4.2inch E-Ink Display Module 400x300 Pixel Black,White Two-Color 3.3V-5V E-Paper Screen LCD Support Full Refresh SPI Interface for Raspberry/Jetson Nano/Ard/Nucleo

#ad
waveshare #ad - Standby power: 170°. It is an ideal choice for applications such as shelf label, with Examples for Raspberry Pi/Jetson Nano/Arduino. Due to the advantages like ultra low power consumption, wide viewing angle, with embedded controller, industrial instrument, White Two-Color, communicating via SPI interface, and so on.

Display color: black, white. Spi interface, compatible with 3. 3v/5v mcus. No backlight, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Grey level: 2. Operating voltage: 3. 3v~5v. Dot pitch: 0212 x 0212. 4. 2inch e-ink display module 400x300 pixel black, clear display without electricity. Refresh power: 26. 4mwtyp.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part Number4.2inch E-Ink Display Module
Model4.2inch E-Ink Display Module

5. waveshare

 #ad

2.9inch E-Ink Display Module 296x128 Pixel White,Black Two-Color 3.3V/5V E-Paper Screen LCD Support Partial Refresh SPI Interface for Raspberry/Jetson Nano/Ard/Nucleo

#ad
waveshare #ad - Full refresh time: 2s. Dot pitch: 0138 × 0138. Display size: 66. 89mm × 29. 05mm. Interface: 3-wire spi, 4-wire spi. 2. 9inch, supports partial refresh.

Ultra low power consumption, keeps displaying last content for a long time even when power down. Due to the advantages like ultra low power consumption, it is an ideal choice for applications such as shelf label, clear display without electricity, wide viewing angle, industrial instrument, communicating via SPI interface, 296x128 resolution, with embedded controller, and so on. Grey level: 2. Outline dimension: 89. 5mm × 38mm. Partial refresh time: 03s. Standby power: 170°. Onboard voltage translator, basically power is only required for refreshing.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part Number2.9inch E-Ink Display Module
Model2.9inch E-Ink Display Module

6. XYG-Raspberry Pi

 #ad

New 7.5 inch E-Ink Display e-Paper HAT B Three-Color Resolution 800×480 SPI Interface for Raspberry Pi 4 3 2 Zero W WH Jetson Nano @XYGStudy

#ad
XYG-Raspberry Pi #ad - Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards, Jetson Nano. 640x384, three-color, 7. 5inch e-ink display HAT for Raspberry Pi, SPI interface. Part number: 7. 5inch e-paper HAT B. This is an e-ink display hat for raspberry pi, with embedded controller, 7. 5inch, communicating via spi interface, supports red, black, 800×480 resolution, and white three-color display.
BrandXYG-Raspberry Pi #ad
ManufacturerXYG-Raspberry Pi #ad

7. waveshare

 #ad

7.5inch E-Paper Display HAT Module 800×480 E-Ink Electronic Paper Screen Three Color White/Black/Red for Raspberry Pi/STM32/Jetson Nano with e-Paper ESP8266 Driver Board WiFi

#ad
waveshare #ad - Come with e-paper esp8266 driver board WiFi allows to display image from PC/smart phone via WiFi conveniently. Ultra low power consumption, basically power is only required for refreshing. No backlight, keeps displaying last content for a long time even when power down.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Height2.05 Inches
Length8.19 Inches
Width5.75 Inches
Part Number7.5inch e-Paper HAT (D)
Model7.5inch e-Paper HAT (D)

8. waveshare

 #ad

Waveshare 2.13 Inch e-Paper Display HAT White Red Black Three-Color E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi Series Boards/Jetson Nano via SPI Interface

#ad
waveshare #ad - No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.

Compatible with raspberry Pi 2B/3B/Zero/Zero W, Jetson Nano. This is an e-ink display hat for raspberry pi, 212x104 resolution, black, with embedded controller, supports red, 2.113inch, communicating via SPI interface, and white three-color display. Due to the advantages like ultra low power consumption, industrial instrument, wide viewing angle, it is an ideal choice for applications such as shelf label, great effect under sunlight, and so on.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Weight0.02 Pounds
Part Number2.13inch e-Paper HAT (B)
Model2.13inch e-Paper HAT (B)

9. waveshare

 #ad

Waveshare 2.9inch E-Paper E-Ink Raw Display Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 296×128 Pixels Three-Color with SPI Interface Without PCB

#ad
waveshare #ad - Ultra low power consumption, basically power is only required for refreshing. Provide online user manual examples for raspberry pi/Jetson Nano/Arduino/STM32, wide viewing Angle, please check the manual carefully before using! Low power, Paper-Like Displaying Without Electricity.

Refresh time: the refresh time is the experimental test data, the actual refresh time will have errors, and the actual effect shall prevail. No backlight, keeps displaying last content for a long time even when power down. There will be a flickering effect during the global refresh process, this is a normal phenomenon.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Height3.54 Inches
Length7.09 Inches
Width3.94 Inches
Part Number2.9inch e-Paper (B)
Model2.9inch e-Paper (B)

10. waveshare

 #ad

212x104 Three-Color 2.13inch E-Ink Display Module Tri-Color E-Paper Electronic Screen Panel SPI Interface with Embedded Controller Compatible Raspberry Pi/Arduino/STM32/Jetson Nano

#ad
waveshare #ad - Ultra low power consumption, basically power is only required for refreshing; Onboard voltage translator, compatible with 3. 3v/5v mcus. No backlight, keeps displaying last content for a long time even when power down. Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards, Jetson Nano. Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part NumberNA
ModelNA

Tags: