As an Amazon Associate I earn from qualifying purchases.
1. Neewer #ad
Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Video Fits 15mm Rod Film Making System,Shoulder Support,Stabilizer,Movie RigRed+Black #adNeewer #ad
- Note: only follow focus, camera and other shoulder rig are not included. Gear ring belt suitable for less than 100mm diameters lens. Easy to mount and take down; Gear drive can adjust camera focus in a more accurate and smooth way.
Non-slip design with grooved knob; White mark ring made of plastic and used to mark the scale on follow focus. Compatible with canon nikon sony and other DSLR Camera Camcorder DV Video; Fits industry standard 15mm rod mounts and 60mm center to center distance.
2. INSYOO #ad
DJI Ronin 3D Follow Focus System for DJI RS 2（Requires use with DJI Ronin Follow Focus Motor） #adINSYOO #ad
- Used in conjunction with the DJI Ronin follow focus motor to assist manual focus lenses in achieving center point autofocus. Specially designed for DJI RS 2. Make your camera focus at a higher level and take perfect photos.
Easily switch between autofocus and manual focus. Packing list:3d follow focus system × 1;1/4''-20 threaded to cold shoe adapter × 1;Camera control cable USB-C, 30 cm x 2.
3. Neewer #ad
Neewer Follow Focus with Single 15mm Rod Clamp,Adjustbale Gear Ring Belt for DSLR Cameras/DV/Camcorder/Film/Video Cameras,Fits Shoulder Supports,Stabilizers,Movie rigs #adNeewer #ad
- Grooved knob for slip-free control. It can be mounted from both sides for left-handed or right-handed photographers. Use gear drive to adjust camera focus in a more accurate and smooth way. Follow focus comes mounts with a single 15mm Quick Release Rod Clamp and can be quickly removed from the rail system, making it easier to change lenses and gear positions.
Easy to install and use. Compitable with all dslr cameras, camcorders. Film cameras and video cameras. It can fit industry standard 15mm/059" rod. Rod not included.
4. Tilta #ad
Tilta Mini Follow Focus for DSLR Lens Zoom Control Lightweight FF-T06 for A7 A9 GH5 BMPCC 4K 6K Camera Cage #adTilta #ad
- The kit includes the mini follow focus, two allen keys, a Zip Tie Follow Focus Ring, a 15mm single rod attachment, a 15x100mm black aluminum rod and a portable case.
The marking disk is removable and can be marked and cleaned for repeated use. The mini follow focus is made as a single unit with the ability to adjust the single rod attachment to fit any sized cine lens or photo lens.
The single rod attachment mounts to any standard 15mm rail. The focus wheel also features a fluid dampening system that helps with precision focusing. For lenses with different pitch gears, we will offer a variety of focus gear attachments. The focus wheel features a 360 degree rotation with adjustable hard stops.
|Part Number||Tilta FF-T06|
5. Neewer #ad
Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Video Fits 15mm Rod Film Making System,Shoulder Support,Stabilizer,Movie RigBlue+Black #adNeewer #ad
- Note: only follow focus, camera and other shoulder rig are not included. Gear ring belt suitable for less than 100mm diameters lens. Compatible with canon nikon sony and other DSLR Camera Camcorder DV Video; Fits industry standard 15mm rod mounts and 60mm center to center distance.
Non-slip design with grooved knob; White mark ring made of plastic and used to mark the scale on follow focus. Easy to mount and take down; Gear drive can adjust camera focus in a more accurate and smooth way.
6. Nitze #ad
MF15B kit, Nitze Follow Focus System A/B Hard Stops QR Clamp for 15mm Rod with Flexible Gear Ring, Crank and Whip #adNitze #ad
- Magnetic mark dial enables you to view focus marks from various angles. The follow focus gear is able to install in front-side/backside. Dovetail design for follow focus gear adjustment within 50mm, damping design gives virtually zero backlash.
Nitze mf15 anodized aluminum Alloy follow focus ensures slip-free & accurate focus pulls. A/b stops can fast repeatably rack between two points to make focusing lenses that have no hard stops much easier.
7. CAME-TV #ad
CAME-TV Came-Astral 2.4G 328 Feet Wireless Follow Focus Control System to Wirelessly Control Foucs,Iris,or Zoom of Most DSLR,Mireless,or Cine-Style Lenses #adCAME-TV #ad
- Use the astral 2. 4 ghz wireless follow focus system from came-tv to wirelessly control the focus, or zoom of most dslr, iris, mirrorless, or cine-style lenses. The core of the system is the pairing of the focus control motor and the focus handwheel. The units can connect to each other from 328' away using a 2.
4 ghz wireless signal. The motor features an 08 mod gear and can operate at a high-torque, 05nm speed at a maximum 250 rpm. It has a mini-usb port that allows you to connect a camera for run/stop remote control or update firmware with a separately available cable.
It is calibrated by a simple automatic process that can be saved to memory. . The handwheel is powered by a built-in 1000mah lipo battery that lasts up to 8 hours on a full charge, and the motor is powered by your camera or external battery via the included D-Tap to 6-pin LEMO-type cable.
The controller features a built-in marking disk and an oled display that provides battery level, and memory information, calibration, and its menus can be navigated using the buttons on the controller. The controller and motor also support run/stop and shutter functions, travel, connection, as well as setting hard A/B/C/D limits for more control over your camera and lens. It also features a loop to attach the controller to a strap or lanyard.
8. Movo #ad
85mm Adjustable Gear Rings, Movo F2X Precision Follow Focus System with Hard Stops and 65mm, 75mm #adMovo #ad
- Our products are designed to ease your technical woes, not add to them. Precision focus: the removable magnetic marking disc helps with viewing focus marks from various angles.
Aluminum construction: A pecisely machined follow focus with high-quality workmanship for professional feel and build. 1-year warranty: we’ve got your back. Professional shots: horizontally or vertically adjustable and reversible with a 08 pitch gear for capturing professional focus pull and transitions.
Our friendly US-Based support is here to help. Precise shots: the intergrated A/B Hard Stops help with fast, repeatable racking between two points and ensures precision focus adjustment.
9. Tilta #ad
Tilta Nucleus-M WLC-T03 Wireless Follow Focus/Lens Control System Partial Kit I #adTilta #ad
- The wireless range of both the hand unit and hand grips is 1, 000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 ¼ miles! This makes it ideal for drone or car-mounted shots. The motors are designed to clamp onto 19mm or 15mm rods with the included rod bushings.
Every motor has a 08 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. The torque of the Nucleus-M Motor at 14. 8v is 2. 5n·m. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.
Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips.
Simply set the motors and hand unit/hand grips to the same channel and you will have full control. The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters. The nucleus-m is a revolutionary and highly customizable 3-channel wireless lens control system.
|Part Number||Nucleus-M T03|
10. FOTGA #ad
FOTGA DP500 II DSLR 15mm Rail Rod Base Plate Support System for Follow Focus Matte Box,DSLR DV Camera 5D II III IV A7 A7R A7S II III GH4/5/5S Blackmagic Cine Camera 4K #adFOTGA #ad
- The camera riser for vertical and horizontal adjustments of the camera Quick Lock Mechanism makes easy and quick assembly of the system. Measurements : complete rail system is made of metal.
Rails length : 250mm rails dia : 15mm Rails center-to-center distance : 60mm Camera height riser adapters legth : 85mm. Package including: dp500 II rod support X 1 as pictures show.
The plate comes with 1/4" camera mounting screws. Features : standard 15mm rails also advantageous for other 15mm accessory attachments Back and forth / side-to-side adjustments The height adjustments in all parts Camera Mounting plate, Lens Support and Riser is possible through Allen-key bolt mechanism.
Hence the large variety of. Color : knobs is blue and all other is black. Thickness of height riser adapters : 8mm lens support length : 65mm Tripod mounting plate length : 80mm Tripod mounting plate thickness : 20mm Screws thread : 1/4 & 3/8.