As an Amazon Associate I earn from qualifying purchases.
1. Comidox #ad
Comidox 2PCS DC 12V 4 Wire PWM PC CPU Fan Temperature Control Speed Controller Module CPU High-Temp Alarm #adComidox #ad
- Circuit load capacity: 5A for each output and 8A for bus current. Note: the above range is only applicable to the PWM range, the actual control effect will vary depending on the fan.
Supports all internal 12v 5a fans, high efficiency, synchronous rectified output, no need for additional heat sinks even for high current operation. Output range: 20%-100% for the first channel, or 40%-100% for the first channel tfl = on, 10%-100% for the second channel and the third channel.
It can be turned on with the three-wire fan monitoring function stall warning. Multiple fans can be used in parallel total current does not exceed 5A, support automatic temperature control and air cooling speed control, temperature control speed has four temperature zone settings, widely used.
2. QINIZX #ad
Automatic PC CPU Case Fan Temperature Control Governor with Sensor Universal for 2 3 4-Wire DC Fan, DC 12V 24V 4A 2-Way Adjustable PWM Fan Speed Controller #adQINIZX #ad
- 4. The temperature measurement range is -20~110℃. 3. When the ambient temperature is lower than the set starting temperature, the governor controls the fan to stop running. Can control various 12v/24V DC 2-wire/3-wire/4-wire fans or motors. Fixed mode: the starting temperature of the governor becomes 30℃ 86°F, full speed range of 30-70°C Full-speed temperature=Start temperature +20°C.
The speed governor has a hysteresis circuit. Notice: the voltage of the dc power supply used must be the same as the voltage of the fan, and the current of the power supply must be greater than the total current of the fan.
Pwm speed controller adopts pwm control technology to realize temperature control and speed regulation. Fan speed control module is equipped with a high-precision temperature sensor with a cable length of 30cm/11.
8inch and comes with a mounting buckle. The start temperature and the stop temperature of the fan are set by the difference of 2°C. Dual working mode optional, 50°c122°f above the fan at full speed; adjustable mode: start-up temperature range: 10-50°C, 30 to 50 degrees fan speed linear increase, fixed temperature mode or adjustable temperature mode. It can be used to measure the temperature of air, liquid and solid surface. The fan speed can be controlled according to the ambient temperature. Fan temperature controller small size: 2.
3. daier #ad
DC 12V PWM PC CPU Fan Temperature Control Speed Controller CPU Alarm Module #addaier #ad
- Support all within 12v 5a fans, high efficiency! even if a large current work does not require additional heat sink! A plurality of fans can be used in parallel total current does not exceed 5A, temperature control speed with four temperature zones for setting up, supports automatic temperature control and manumotive speed control, synchronous rectifier output, easy to apply in a variety of applications! It can be opened with a three-wire fan monitoring function stall warning.
When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed.
Bf1 bf2 no. Circuit load capacity: maximum current per output 5A, the bus currents up 9A. 4, alarm will automatically eliminated when the fan is rotated recovery. If bf1 and bf2 both are open on, 5: corresponds fan1 fan2 stall alarm function switch, the FAN1, when the corresponding open channel fan break down, FAN2 have any one or both stops, the controller will alarm with soundand light works with buzzle, the controller will alarm!.
4. KLLsmDesign #ad
10 * 5v 3pin A-RGB Ports with Magnet （Black）, Kllsmdesign Pwm Fan Temperature Controller Integrator, 8 * 4 Pin Fan Speed Controller Ports, Remote Control Computer RGB Light Adapter #adKLLsmDesign #ad
- Pwm fan controller: the back uses a magnet device, MSI, gigabyte, which is easy to be attached to the inside of the chassis for easy installation. Cool luminous shell: the fan thermostat looks like a sports car, width: 55mm, length: 118mm, height: 24mm.
Accessories: the package contains rgb fan thermostat x1, temperature control cable x1, SATA power cable x1, motherboard sync cable x1.
There are about 365 light modes to choose from. Supports 5v motherboards such as ASUS, and ASRock. Wireless remote control function: the controller is equipped with a wireless remote control switch, which can freely switch between the hosting mode and the remote control mode.
Desktop computer p-argb fan temperature control controller:direct sata power Input, support 8 PWM intelligent temperature control 4-pin + 10 5V ARGB interface 3-pin + remote wireless remote control three in one function, enables users to optimally expand cooling capability within the chassis.
|Part Number||PC-Fan Hub-Black|
5. Qianson #ad
DC 12V 1A Automatic PC CPU Fan Temperature Control Speed Controller Case Fan Governor #adQianson #ad
- Fit for 2, 4 line 12v fan, 3, stepless temperature control can be achieved. Single temperature sensor, easier to use, more responsive control. This dc12v governor jcf1201 type can be controlled according to the ambient temperature of the fan speed, automatic stepless speed, no manual control, the higher the ambient temperature, the faster the fan speed control.
New dual-mode function: fixed temperature mode and adjustable temperature mode. Board size: 45x25x30mm lxwxh, Sensor probe length: 325mm.
6. ZRM&E #ad
ZRM&E 4Pin 12V PWM Fan Hub Speed Controller SATA 1 to 10 Way PC Cooling Fan PCB Adapter CPU Cooler Power Splitter Socket with PWM Connection Cable #adZRM&E #ad
- Type: sata 1 to 10 way 4-pin 12v pwm Cooling Fan Splitter Hub. Installation: eva double-sided adhesive can be used to fix the hub in the chassis. Function: support simultaneous starting of 10 channel 4PIN fans, solving the problem of shortage of motherboard.
Package: 1 x sata 1 to 10 way splitter cooling fan Hub PCB Adapter + 1 x 4-Pin PWM Connection Cable. Interface: 1pcs sata power interface, 1pcs red delicated CPU fan interface, 1pcs pwm interface for connecting to CPU FAN interface on motherboard, 9pcs black conventional PWM fan interface.
7. Abovehill #ad
Abovehill PWM Fan Speed Controller,Adjustable Fan Temperature Control Module 2A with Temperature Sensor for 12V/24V DC Fan #adAbovehill #ad
- 4. Fan speed control module is equipped with a high-precision temperature sensor with a cable length of 30cm and comes with a mounting buckle. When the ambient temperature is lower than the set starting temperature, the governor controls the fan to stop running.
5. Pwm speed controller adopts pwm control technology to realize temperature control and speed regulation. It can be used to measure the temperature of air, liquid and solid surface.
The temperature measurement accuracy is ±1℃. Maximum drive current 2A. 3. The temperature measurement range is -20~110℃. There are two working modes for the adjustable temperature control governor.
Can control various 12v/24V DC 2-wire/3-wire/4-wire fans or motors. Fan speed controller, small size, high performance, saving operation space. Contact us if you encounter any product problems. We will provide suggestions or even refund services for products with quality problems. The fan speed can be controlled according to the ambient temperature. 1.
8. Cold & Colder #ad
DC 12v 3a 4pin PWM PC CPU Fan Temperature Control Thermostat Speed Controller #adCold & Colder #ad
- Supports voltage range 8-18 volts, up to 3A more w/ bypass. Reduce noise & maximize fan life with this smart controller. Board size: 43mm * 18mm * 9mm without extension of the interface. Factory default: low speed 20%, [email protected]
30 ℃ every 5 ℃. Temperature probe ntc 50K B = 3950 included.
9. NOYITO #ad
NOYITO 10-Channel PC FAN PWM HUB DC12V SATA Port Power Supply Maximum Support 10-Channel PWM Fan Temperature Control Suitable for Motherboard 3Pin 4Pin fan #adNOYITO #ad
- The product package also contains a 60CM PWM temperature control cable. Br>. The main function: to expand the 10-way 4-pin fan interface to solve the problem of insufficient number of motherboard fan interface, and centralized handling fan cable messy problem.
Br>. 3pin fan can also be used, but after the connection is full-speed run, because 3Pin fan without PWM speed control function. Br>. Also with a fixed screw hole.
Product name: pc fan pwm hub. Sata port power supply maximum Support 10-Channel PWM Fan. Br>. Black interface for the pWM conventional fan interface no speed signal, only show one of the fan speed!.
Pwm interface to connect the motherboard cpu_fan interface, but does not affect the pwm function. Use: for 12v motherboard 3pin / 4pin fan. Note: to avoid the speed of chaos and computer crashes, an interface to expand out of the multi-channel interface, Orange interface for the CPU fan dedicated interface with speed function. Hub pcb board behind with a 3m adhesive, easy to paste in the flat place.
10. ELECTOP #ad
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller #adELECTOP #ad
- Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function.
You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, the hub has a power source fed from the computer power supply, that designated by the system for that fan.
Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
Since the mainboard can only receive one rotation speed signal, but no speed signal. So, then the speed is regulated by the speed for the "source" fan. Red is expected to be a pass through for the cpu fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. For both 4-pin and 3-pin fans.