As an Amazon Associate I earn from qualifying purchases.
Technical parameters input supply voltage: dc 10v-55v; maximum current: 60a; Continuous current: 40A; Speed range: 0%-100% ; Control frequency: 15KHZ; Apply to: DC Brush Motor.
High power speed controller switch which is much more adaptable and convenient to change the motor direction. Note: the motor cannot be used in electric vehicles. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation. The input voltage of pwm motor speed controller should be equal to the rated voltage of the motor within 10V-55V, or it will be burnt.


Otherwise, the speed controller may be damaged. The input voltage must be equal to the rated voltage of the motor.

Maximum continuous output current 2A. After cooling, the fuse is automatically restored. Maximum output power 30W. This is a 2a high current governor, which can't drive larger than 05a continuous current / the 775 motor / children's car motor.
Secure enoughthe speed controller is equipped with a self-recovery fuse. Please confirm again before purchasing. Pay attention①please connect this dc controller to dc power supply. Widely applicationsit is suitable for the speed regulation of DC motor, fan, fish tank oxygen pump and other products in DC1. 8v--12v.



Soft-start protection: the motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor.
Maximum power: 150W. Good repeatability, can be quickly adjusted to the value you want. With the start and stop button: the pwm dc motor governor with start and stop button, and can be controlled by an external switch, meet your multiple control needs.

The adjustment step value of this motor speed controller can be set from 01 to 25 to meet different customer needs. This motor speed controller uses two original low internal resistance MOS tubes and a preceding stage driver, which has better performance and more stable performance, and supports high current and high frequency.
The start time and stop time can be set to 00-9. 9 seconds; the soft start of the motor, no impact current, effectively protects the motor and prolongs the service life of the motor. The setting of the minimum value avoids the situation that the motor does not rotate or the light does not turn on with the value, and the setting of the maximum value avoids the situation that the motor is too fast or the LED is too bright when displaying 100


1. HARMNEE
#ad
PWM DC Motor Speed Controller, LED Display Stepless DC Motor Speed Controller with Adjustable Potentiometer and Forward-Brake-Reverse Switch, DC 10-55V/60A
#adHARMNEE #ad - Switch functionthe pwm dc motor speed controller come with switch function. And led display screen shows the motor speed from 0% to 100% of the rated speed. Application the dc motor driver can be used on brush motor speed regulation, light dimming regulation in the DC circuit.Technical parameters input supply voltage: dc 10v-55v; maximum current: 60a; Continuous current: 40A; Speed range: 0%-100% ; Control frequency: 15KHZ; Apply to: DC Brush Motor.
More information #ad
Easy to operatethe stepless motor controller has a simple potentiometer knob adjusts the motor speed from 0% ~ 100% smoothly. Excellent heat dissipation performance the enclosure of the speed controller for motor is an aluminum enclosure. High power speed controller switch which is much more adaptable and convenient to change the motor direction. Note: the motor cannot be used in electric vehicles. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation. The input voltage of pwm motor speed controller should be equal to the rated voltage of the motor within 10V-55V, or it will be burnt.
Brand | HARMNEE #ad |
Manufacturer | HARMNEE #ad |
Height | 1.42 Inches |
Length | 3.07 Inches |
Width | 4.33 Inches |
Model | Standard 10-55V/60A Max |
More information #ad
2. RioRand
#ad
RioRand 7-70V PWM DC Motor Speed Controller Switch 30A
#adRioRand #ad - Suitable for long hours of work:Circuit optimization design, stable. Pwm frequency: 12KHZ. Using imported high-voltage MOS tube, three pressure 100V high-frequency low-resistance capacitors, automotive fuses.More information #ad
Potentiometer cable(about 15CM) can be separated, with running stop brake function. Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range.Brand | RioRand #ad |
Manufacturer | RioRand #ad |
Height | 1.4 Inches |
Length | 3.4 Inches |
Width | 2.3 Inches |
Part Number | RR-MJLK-FBDG |
Model | 7-70V PWM DC |
More information #ad
3. TKXEC
#ad
Adjustable Digital display 10-55V 60A PWM DC Brushed Motor Speed Controller Switch Control 12V 24V 36V 48V Forward Brake Reverse For power wheels regulation 60A PWM
#adTKXEC #ad - Digital display :motor rotation speed Percentage 0~100%, Accurate adjustment speed. Adjust output Current Control Motor Speed. Notice: if there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car.Otherwise, the speed controller may be damaged. The input voltage must be equal to the rated voltage of the motor.
More information #ad
Wide voltage: wide voltage input 10-55V, maximum output current 60A, Continuous current: 40A. Speed control knob:stepless speed regulation, and with Forward-Brake-Reverse Switch. Only work for Brushed Motor. Notice 1: the power of the input power supply must be greater than 1. 5 times the rated power of the motor to make the motor work note: the input voltage and the rated voltage of the motor must be consistent.Brand | TKXEC #ad |
Manufacturer | shenzhenshixinruidianzikejiyouxiangongsi #ad |
More information #ad
4. WayinTop
#ad
WayinTop 3pcs PWM Low Voltage Motor Speed Controller DC 1.8V 3V 5V 6V 12V 2A 1803BK 1803B Adjustable Driver Switch with Speed Control Knob Pack of 3
#adWayinTop #ad - Duty cycle adjustable 0%-100%. When the current is too large, the fuse is automatically disconnected. High performanceinput supply voltage dc 1. 8v-15v. Never connect directly to household 220V AC power supply, or it will be damaged; ②Don't power supply larger than 12V.Maximum continuous output current 2A. After cooling, the fuse is automatically restored. Maximum output power 30W. This is a 2a high current governor, which can't drive larger than 05a continuous current / the 775 motor / children's car motor.
More information #ad
Motor speed controllerultra-low voltage dc motor governor with the chip model: NE555; Potentiometer with switch function; Use a 2A resettable fuse to protect the controller; Power-on indicator. Secure enoughthe speed controller is equipped with a self-recovery fuse. Please confirm again before purchasing. Pay attention①please connect this dc controller to dc power supply. Widely applicationsit is suitable for the speed regulation of DC motor, fan, fish tank oxygen pump and other products in DC1. 8v--12v.
Brand | WayinTop #ad |
Manufacturer | WayinTop #ad |
Height | 0.39 Inches |
Length | 3.94 Inches |
Width | 1.97 inches |
Part Number | FC#WYTP40-3 |
Model | FC#WYTP40-3 |
More information #ad
5. BOJACK
#ad
BOJACK Low Voltage DC Motor Speed Controller PWM 1.8v 3v 5v 6v 12v 2A 30W Adjustable Driver Switch 1803BK 1803B Pack of 2 Pcs
#adBOJACK #ad - Input voltage: dc 2. 2v-15v; output voltage: 1. 8v-15v. Maximum output power: 30W. Adjustable duty cycle: 0%-100%. Equipped with a 2a self-recovery fuse, which will automatically disconnect if the current is too large, and will automatically recover after the fuse cools down.More information #ad
Maximum continuous output current: 2A.Brand | BOJACK #ad |
Manufacturer | BOJACK #ad |
Part Number | BJ-1803BK |
Model | BJ-1803BK |
More information #ad
6. tatoko
#ad
Tatoko DC Motor Speed Controller 10V-55V 12V 24V 36V 40A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch,Ajustable Potentiometer &Digital Display
#adtatoko #ad - Outer casing: it is designed to protect the controller board from damage as well as dissipate heat. Dc10v-55v pwm brushed dc motor speed controller Adjustable Driver CW CCW Reversible Switch With Digit Display. Potentiometer with switch function, High power speed controller switch which is much more adaptable.More information #ad
Input supply voltage: dc 10v-55v;maximum current: 60A; Continuous current: 40A;Speed range: 0-1oo%. The input voltage must differentiate "+", "-", The input voltage should be equal to the rated voltage of the motor within 10-55V, or it will be burnt.Brand | tatoko #ad |
Manufacturer | tatoko #ad |
More information #ad
7. PEMENOL
#ad
PWM Motor Driver, PEMENOL DC 5V 12V 24V 150W Motor Speed Controller Adjustable Speed Regulator with Stepless Variable Rotary Switch Signal Generator Driver Module
#adPEMENOL #ad - Digital rotary encoder button: the rotary encoder adopts the principle of digital pulse, high precision, the output will be as much as you rotate it, and the same value will be input when you rotate it next time. Convenient for customers to use according to the working characteristics of their own motors.Soft-start protection: the motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor.
More information #ad
Working voltage: dc5V~30V, input with anti-reverse connection protection. The adjustable electronic speed controller can automatically save the set parameters to prevent data loss after a power failure. Duty cycle, duty cycle upper and lower limits and working frequency can be set: the 3 digits lED motor speed regulator can adjust the duty cycle, the upper and lower duty cycle limits and the operating frequency. Maximum power: 150W. Good repeatability, can be quickly adjusted to the value you want. With the start and stop button: the pwm dc motor governor with start and stop button, and can be controlled by an external switch, meet your multiple control needs.
Brand | PEMENOL #ad |
Manufacturer | PEMENOL #ad |
Height | 0.91 Inches |
Length | 3.11 Inches |
Width | 1.81 Inches |
Part Number | 13861 |
Model | 13861 |
More information #ad
8. diymore
#ad
PWM Motor Speed Controller,diymore PWM Adjustable Speed Regulator Generator DC 5V 9V 12V 18V 24V 30V 12A 360W MGP Motor Governor with Dual MOS Driver
#addiymore #ad - This motor speed regulator uses a digital encoder knob to adjust the motor speed. It comes with a start-stop button and can be controlled by an external switch to meet various control needs of customers. In this case, you can express to adjust to the value you want. It can be adjusted slowly and finely, or quickly and roughly.The adjustment step value of this motor speed controller can be set from 01 to 25 to meet different customer needs. This motor speed controller uses two original low internal resistance MOS tubes and a preceding stage driver, which has better performance and more stable performance, and supports high current and high frequency.
More information #ad
The pwm motor speed controller with standard 5135 instrument casing and back cover, which is convenient for customers to install. Compared with ordinary potentiometers, it has higher precision, better consistency and no drift. The motor speed controller can set the minimum value, maximum value and working frequency, which is convenient for customers to operate and use according to their own motor or LED working characteristics. The start time and stop time can be set to 00-9. 9 seconds; the soft start of the motor, no impact current, effectively protects the motor and prolongs the service life of the motor. The setting of the minimum value avoids the situation that the motor does not rotate or the light does not turn on with the value, and the setting of the maximum value avoids the situation that the motor is too fast or the LED is too bright when displaying 100
Brand | diymore #ad |
Manufacturer | diymore #ad |
Part Number | 1_X-HX0005A |
More information #ad
9. Walfront
#ad
10-50V 100A 5000W DC Motor Engine Speed Controller 0-100% PWM Control Industrial Motor Speed Regulator for DC Brush Motor DC Lamps
#adWalfront #ad - Working voltage:dc 10-50v;max. Rated current60APeak current100A. Operating temperature:-20 to 40 It can perform normally when the temperature is below 0 . This motor speed controller can also be used for dimming DC lamps or controlling DC heater.More information #ad
Universal speed controller can be used for DC brush motor, exhaust blower, treadmill motor, car air conditioning motor, suitable for car cooling fan motor, etc. Control power: 001w to 5000w;pwm duty cycle:0%-100% and quiescent current is 004a not over 40ma when voltage is DC10V to DC30V.Brand | Walfront #ad |
Manufacturer | Walfront #ad |
Weight | 480 Grams |
Part Number | Walfront-052601 |
More information #ad
10. Acxico
#ad
Acxico 1Pcs PWM DC Brush Motor Speed Controller DC 10-55V 60A CW CCW Reversible Switch Digital LED Display Potentiometer Switch Built-in Brushless Fan
#adAcxico #ad - Speed regulation Mode: Potentiometer 100K/with switch function. Continuous current: 40A;Support large current start, protection for motor stall. Digital led display of 0-100% speed percentage, easy to read.More information #ad
Dc 10-55v max 60a cw ccw reversible switch PWM Brush Motor Speed Controller. Built-in heat dissipating fan, not easy to fever. Great for fast heat dissipation.Brand | Acxico #ad |
Manufacturer | Acxico #ad |
Part Number | LB158 |
More information #ad